ITOP-144 PRE-CABLED
The pre-cabled iTOP-144 is a 250 mm high optical head for iXIO or HPUL beam-mounted distribution frame equipped with 12 iMOD-TOP-ER-12 pivoting optical modules and a 30 to 100 m cable tail (see ACOME cable data sheet). The pre-cabled iTOP-144 is directly fixed to the profile using an indexing system which allows for accurate, quick and easy positioning.
The pre-cabled iTOP-144 is a 144-fibre optical head with a cable tail. It is pre-cabled in the factory by mass splicing on batches of 12 pigtails. Maintenance is provided by replacing individual pigtails using a standard splice in the splice holder.
It is fitted with a device for the anchoring and storage of the optical fibre protection tubes. These tubes distribute the optical fibres to the different pivoting modules.
The patch cord management is at the left head output and then through the rings fixed on the beams which ensure the management of the different flows.
Factory tested and assembled- Factory-Spliced
- Fast implementation
- Figure 8 Coil
- Pivot
- Serial number
- Storage
- Work station maintenance
Product benefits
- Fast deployment
- Factory splicing
- Factory assembly
- 8 coiling
Datasheet
