iLIA RACK OPTIONS

PATCH-CORD GUIDES

Can be used to guide patch cords connected on the front panel to the sides of the frame, to prevent snagging or jamming when closing doors. Overall dimensions (HxDxW): 44 × 282 × 483mm (19″) 533mm (ETSI) on iLIA 1 U 41 × 71 × 415mm patch-cord guide only

EXTERNAL REMOVABLE ANCHORING

iLIA racks can accommodate, at the rear, ACS or BEC-72/144-6T anchoring devices. The protective tubes (corrugated or smooth) link the anchoring device and the rack. External anchoring enables a multi-tube optical cable to be distributed to multiple racks.

1 U PATCH-CORD STORAGE

The patch-cord storage rack is attached by rivets under the iLIA connection rack. It can be used to organise overlengths of optical patch cords, thereby facilitating network maintenance. It has four compartments which can each hold up to 12 m of 2.8mm diameter cable. Overall dimensions (HxDxW): 88 × 282 × 483mm (19″) 533mm (ETSI) (including iLIA rack)

iLEO

iLEO is a patch-cord storage rack designed to coil overlengths of optical patch or copper cords in cross- connect frames. It is equally well suited to a 19″ or ETSI chassis and enables optimal wiring management. It can also be equipped with the patch cord guide shown above. Overall dimensions (HxDxW): 44 × 205 × 483mm (19″) 533mm (ETSI)

iLEO-12

iLEO-12 is a slanted 12-compartment, depth-adjustable storage rack, designed to coil overlengths of optical patch or copper cords in cross-connect frames. It can be installed in a 19″ or ETSI frame. It can also be equipped with the patch cord guide. Overall dimensions (HxDxW): 44 × 249 × 483mm (19’’) 533mm (ETSI)