iMOD-TOP MTP® modules clip onto the iTOP-144 optical head. They have a panel of 12 SC, LC or 6 MTP® adapters, an integrated 12-position splice tray, and can accommodate pigtails or optical splitters as required.

The iROP-ES is an optical cable head for racks (HPUL rail) which provides:

The iROP-ER is an optical cable head for beams (HPUL rail) that provides splicing and optical connection of single or multimode fibre optic cable to active network equipment. The modules allow the management of splices, the connection of pigtails and the coiling of bare fibres.

The iTOP-BKO is an optical head adapted for use with pre-terminated breakout cables. 250 mm high, it can be fixed directly to a beam using an indexing system allowing a precise, easy and quick positioning.

The iTOP-BKO head is composed of a chassis, two pivoting trays and two iMOD-TOP-BKO modules.
The iMOD-TOP-BKO is a connection module. It has a front panel with 64 connections, an anchoring area for up to four breakout cable fan outs.
The patch cord management is on the left head output and then through the guides fixed to the beams which guarantee the management of the different flows.

The iTOP-CP is an optical head high beam splitter, with a height of 250mm, for the iMOD-TOP-CP 16/32/64 range of pivoting optical modules.
The iTOP-CP is mounted directly to a beam via an indexing system that allows for quick, easy, and accurate positioning.

The pre-cabled iTOP-144 is a 250 mm high optical head for iXIO or HPUL beam-mounted distribution frame equipped with 12 iMOD-TOP-ER-12 pivoting optical modules and a 30 to 100 m cable tail (see ACOME cable data sheet). The pre-cabled iTOP-144 is directly fixed to the profile using an indexing system which allows for accurate, quick and easy positioning.

The pre-cabled iTOP-144 is a 144-fibre optical head with a cable tail. It is pre-cabled in the factory by mass splicing on batches of 12 pigtails. Maintenance is provided by replacing individual pigtails using a standard splice in the splice holder.
It is fitted with a device for the anchoring and storage of the optical fibre protection tubes. These tubes distribute the optical fibres to the different pivoting modules.
The patch cord management is at the left head output and then through the rings fixed on the beams which ensure the management of the different flows.

The iMOD-TOP modules are clipped onto the iTOP-144 optical cable head. They have a strip for 12 optical adapters, an integrated splice tray (12 positions) and can accommodate pigtails or optical splitters as required.

The iTOP-144 is an optical head with a height of 250mm, for steel or aluminium profiles, designed for iMOD-TOP pivoting optical modules. It is directly fastened to a iXIO or HPUL free- standing optical distribution frame via an indexing system, enabling quick, easy, and accurate positioning.

The iXIO-G3 free-standing optical distribution frame is a very high-capacity fibre-optic cross-connect open system. This type of solution is suitable for use in Central Office and in data centres.