The 19” 1U 3X7F MODULES OPTICAL RACK is composed of:
• 1 metal frame;
• 3 horizontal slots for sliding 7F modules;
The 7F sliding optical modules are available in several versions:
• R-8/12 SCA module connection version;
• ER-8/12 SCA module splicing and/or connection version;
• CPL-1×8 R/ER modules in splitter and connection and/ or splicing version.

L’article 19” 1U 3X7F MODULES OPTICAL RACK est apparu en premier sur Idea Optical.

The iTBA is composed of:
• 1 static metal part fitted with a cable guide;
• 1 pivoting tray with a right or left hinge, split into 2 zones:

•    – 1 zone with a 1 to 5 km primer coil, and a splice tray for soldering and replacing long pigtails;
•   – 1 coiling zone for long pigtails;

• 1 metal cover protecting the coil zone.

L’article iTBA est apparu en premier sur Idea Optical.

L’article HORIZONTAL MANAGEMENT SUBRACK 4U L/R est apparu en premier sur Idea Optical.

The iTOM-V3-144 pre-connectorized consists of :
• 1 fixed metal part incorporating a cable expansion device and allowing the guidance of transport tubes to the splicing trays ;
• 6 individual trays that pivot to the right or left with a capacity of 24 fibers in SC/APC connectors ;
• 25 or 60 m pre-connected cable directly connected to each tray.

L’article iTOM-V3-144 PRE-CONNECTORIZED est apparu en premier sur Idea Optical.

The iLEX is composed of:

• 1 fixed tray polycarbonate comprising two separate areas:
  • 1 “electro-optical” area to house and fix an active equipment (not supplied) of a maximum size of 40 x 250 x 340 mm (HxPxL);
  • 1 “optical” area used to anchor a 12 OF optical cable and splice fibres with a 4 or 6 connectors SC (SX or DX) or LC DX adapter panel.
    This area is protected by a transparent cover;
• 2 openings reserved for cable passage (optical, electrical);
• 2 19″ brackets allowing mounting and depth adjustment any types of frames and ETSI fixing bracket extensions as an option.

L’article iLEX est apparu en premier sur Idea Optical.

The iCOL-AF-ER/R-12 is composed of :
• 1 steel frame with RAL 7035 colour paint;
• 1 door secured by a lock;
• Different size cable glands to guarantee box leak tightness and cable entry;
• 1 secure cover with identification label for the connection strip;
• 1 splice tray swivelling 12 splice;
• 1 front panel 12 connection;
• 1 fixing plate for pylons or posts (option).

L’article iCOL-AF-ER/R-12 est apparu en premier sur Idea Optical.

The 19” LGX OPTICAL RACK is composed of :

• 1 metal frame;
• 1 row of slots for 14 single modules or 28 half-modules available in several versions :
  * ER-8 splicing and/or connection version modules;
  * ER-12 splicing and/or connection version modules;
  * R-8 microbreakout version modules Ø 900 mm;
  * R-16 microbreakout version modules Ø 900 mm;
  * CPL-1×8 coupler and connection version modules;
  * CPL-1×16 coupler and connection version modules;
  * R-8 microbreakout version half-modules Ø 900 mm;
  * CPL-1×4 coupler and connection version half-modules;
  * CPL-1×8 coupler and connection version half-modules

L’article 19” LGX OPTICAL RACK est apparu en premier sur Idea Optical.

The iRMO-RES-200/400 is composed of:

• 1 support plate made of unpainted electrogalvanised steel;
• either 13 or 26 half-cylinders depending on the selected configuration used for patch cord cross connection;
• 1 colour coded labelling placed on the half-cylinders;
• 1 or 2 patch cord passage fingers depending on the selected configuration;
• 1 lower stop on the iRMO-RES-400 version.

The iRMO-RES-200 version is designed for intra-frame patch cord cross connection. It is mounted on the right or left of an iRMO-606/608. A frame extension available as an option is required for this configuration.
The iRMO-RES-400 version is designed for inter-frame patch cord cross connection. It is mounted between two iRMO-606/608.

L’article iRMO-RES-200-400 est apparu en premier sur Idea Optical.

The iRMO-603/606/608 modular frame is equipped with:

• 1 open steel frame fitted with 2 x 19″ depth-adjustable profile rails;
• 47 cable glands to pass the patch cords located on each U of the 19″ profile rails;
• 1 x 12-colour identification distributed over the height of each 19″ profile rail to identify the patch cord output areas;
• 2 wall mounting supports.

L’article iRMO-603/606/608 est apparu en premier sur Idea Optical.

This modular optical splicing rack iRMO-604/606-BF is composed of:

• 1 open steel frame fitted with 2 x 19″ depth-adjustable profile rails;
• 4 bare fibre organisers, each equipped with a return zone, an anchoring section with 3 bi-material multi-pins, 80 x IOC23-01 single splice trays for 12 fusion splice protectors or 40 x IOC23-06 double splice trays for 24 fusion splice protectors and 2 mass splice protectors, depending on the selected configuration;
• 3 passage cable raceways for micro modules (2 central and 1 rear);
• 1 cable anchoring deck located at the top of the frame;
• 4 storage bags for spare micro-loose tubes from underground cables, fitted with a pivoting front flap that can be locked by push-pull.
• 2 wall mounting supports

L’article iRMO-604/606-BF est apparu en premier sur Idea Optical.